Search results

Turbotom and Junker1984...thx guys for your detailed answers...sorry i just read your replies...

Hi>> Im just wondering, why there are register pin (plate clamps) that are partly round, full round or rectangle shapes? Is there any advantages of a particular set of pin shapes (e.g partly round combined with rectangle, etc)? My plate punch makes holes that are full rounds (2 round...

Hi guys... Can you tell me how to set my plate clamps to their home postions/"0" positions. I know there are mechanical stops on my clamps..but i need to know the methods to set them accurately..thx

Junker...how do you set "home positions" for each clamp using Grid..can you explain to me more details. My press is GTOV...thanx

Hi guys...need some basic info here.. 1.When some people here mention running their presses inter z roller disintegrated, what do they mean? is it completely pulling out the z roller from the machine or the z roller still is in contact with the plate form roller? 2. Is it possible to run this...

Thx man...i ll start looking at my gripper tips

thx for your reply man..its an old model..1987..so what are you saying that i need to replace all the grippers in the problematic unit? and do you the problem lies on the transfer or impression?waiting for your reply...

Junker1984..i also have a similar problem with my GTO 4 color...but it happens with my 3rd unit...its not doubling..but its misregister...most of the time it occurs in a perfect cycle and on the gear side...what do u think is the problem...and the easiest way to set grippers...hope to hear from...

Hi everyone..need your help here We often experience misregister in unit 3 (magenta) when printing heavy ink covered job...the register keep moving...we tend to get more of this problem when printing with light stocks..please need your help..thx. i also need to ask how to set transfer and...

Hi every1.. like the title says...im having an "ink building up "prob on the edge of the pan rollers...its a GTOv alcolor...need help here..thx

YOU'RE SPOT ON.....:) Yes...previously we experienced a small electric problem...and thats the cause of it..according to the electrician...there was a cable that is not screwed to its place and making the machine electric unstable and THE MACHINE IS NOT GROUNDED WELL...as it just been moved in...

Hehehe...thanx for the input...yes its not a stream feeder, anyway..its been solved this morning...its an electrical problem that causes the machine is not stable when "impression is on". Thanx man for your thought..:)

Hmm...but can you explain why once a paper successfully delivered to the last unit...the rests will uninteruptly get printed...i ll have a look tommorow anyway, what do you mean with the wheels on the back of the sheet?...hope to hear more from you...thx

Yes...i still do have the problem... Just got a technichian came over to oversee the prob...but he still havent got a clue either...the thing is...once a paper successfully came out at the table in the last unit..it will never stop...as for the safety...we have thoroughly checked all the points...

Hi guys... My GTO V often stops when start printing...when it just feeds paper it s ok...but once i start printing (around 5 to 6 paper through)...then it stops (it doesnt reach the last unit). Some people suggest that there may be a problem with the safety guard switch...or even a loose...

Hi every1.... I need to know how to get dampening roller stripes for my GTO V alcolor. And i also need the acceptable width for each roller....thx a lot...

Hmmm....i ll give it a shot...thx

Hi guys... Just wondering...why some pressmen put packing under their plates??Thx

Thx man...

Hmm...good point luke... Any1 else has anything to say??thx