Search results

Hello, we are looking to buy Heidelberg Varimatrix, prefered is new design (2009+), low counter and fits our budget. EU location prefered. We are open to offers at: kerndl@amaprint.cz Best regards!

Hello, yes! It seems it only needs to make "hard" re-boot, so 1. Turn printer off 2. Unplug from power 3. Unplug the finisher, wait a minute 4. Plug to power 5. Turn on 6. Its working! Just make some simple catch tray from a piece of plexi or plastic :)

Hello printers! I have old Xerox DC250 with long delivery - finisher that is connected to the printer by cable. So it looks like this: I want to remove it and use Simple Catch tray. But problem is that: When I disconnect finisher cable, machine shows error and stops... Is there anything...

Thats great! Please somebody try it... And GOT 1000 can be reloaded with files that I already shared and microUSB cable :)

Yes I would like to know the method also. Btw. what is your exact type of controller? Is it GOT940 or GOT1000 ?

Hello guys, I have PC with InkZoneLoop (Clsoed-Loop) and InkZonePerfect (CIP3) with connection modules for Heidelberg, it was used on 2003 SM 5 colors, CPC2000 console. I can also add Techkon SpectroDrive. All in good working condition! PM me for price, or contact by email kerndlmichal@seznam.cz

yes, thats correct... Maybe you will be lucky and you will disassemble the GOT from Duplo and send it to some local service, I was lucky with one here in CZ. If you are good at electronics, you can try to dig deeper in datasheets, that can be found for your specific GOT model, there are chapters...

Try theese files, I´m not sure if F1 file is working, I didnt managed to transfer it... the .hex file needs to be programmed directly to EEPROM (by socket) .F1 file: https://mega.nz/file/uOwmmYDD#ZC5nSVaI-FdaUFuB1wirG9C9yZU_LywKB2TA5q5VK7k .hex file...

Hi, did you get it working? Do you still need help?

Yes, I have solved this. You can download software, that is needed to upload to GOT: https://mega.nz/#!2CJTyITD!R6tv5-ylWnXNLC555hPgtHRVqvHbmLXcu32Ieg3kvtY Data transfer tool for uploading is here: https://mega.nz/#!jWhiAC4b!x8raCFa3q1hkvnoScxWH8npP9m3LZYFzHi40u0jLQ9w 1.) Download software and...

Hello, I´m thinking about buying used Dymatrix or Varimatrix, I would like to ask if somebody on forum owns similar machines? What are your references/experiences with it? I dont know what is difference between theese two? Dymatrix can make thicker boards, Varimatrix is max. 1mm but is more...

yes thats it, exactly! Is it same for R700 ?

It is simple on our roland, you just lock the motor by tool, than manually rotate the trimmer to adjust zero position, it is mechanical, so nothing needs to be saved on console... I can´t find a picture of the requied tool on google, maybe if you will find it in your toolbox, it´s good way to...

We have Manroland 200 and zero positions are setted-up by fixing the motors by tool and zero value is set by rotating the trimmer on servo motor itself. It can also be adjusted from console, it can be found in manual I think...

Hello! I have same problem with Duplo 4000. I Have backup file for Duplo 5000, does somebody have *.F1 file and want to share it? thanks!

Hi, We have some problems recently with "mottling" or simply not homogenous solid areas. It is mainly visible on Pantone colors (or maybe in conjunction with printing unit#5?). CMYK looks good. Any ideas? Details: Press: Manroland r205e 2006 Ink: Huber Fountain: Substifix 3% + IPA Paper: GC1...

Imho it is not in manual because it should be done by service... I think its not that easy, but maybe I´m wrong? Once we have removed whole pole from the inside, and it was about 10 turns, but if you are adjusting one by one i dont know...

What version of Expresso do you have? I´m mostly using D6V6 color bar, it is for 24 zones, Im not sure how many zones does your machine have... You can download my collection of stripes including .stp files for Expresso :) If you will need help with using them, feel free to contact me. You can...

What is your software? Expresso?