Recent content by ssneoh

  1. SM 102 - Side pull guide not working.

    Heidelberg service personnel came and solved it. They like do a calibration then issue solved. There is error FFFA on the screen, now it gone and working.

  2. SM 102 - Side pull guide not working.

    Good day. We have a SM 102-2P machine, year 2001. Our side pull guide is not working. The motor is not moving. We suspect that the value of the potentiometer and the motor is not in sync. Anyone got a guide or manual (electrical & mechanical) on how to set this? Thank you.

  3. Monitoring the main motor brake

    Year 2001

  4. Monitoring the main motor brake

    Hello. I'm having an intermittent problem our machine SM102-2 P (old machine). Sometimes, the error "Monitoring the main motor brake" will happen. I checked and there is no component like a brake switch to monitor if the brake is on or off. There is just a simple cable(power) to activate the...

  5. Evolution 700 (775) dampening sensor (teach).

    Email sent.

  6. Evolution 700 (775) dampening sensor (teach).

    Is there any guide to teach the dampening sensor for evolution 700 machine (series: 775)? SENSOR_ULTRASCHALL ZWS-15/BE/MAN2.1A

  7. SM102-2 P: SSK not working > 2 boards.

    The issue is gone. I've changed the NTK85 with a spare because the is a voltage drop (intermitent) and I also unplug all the ribbon cable at the back panel of the SSK and clean them with contact cleaner.

  8. SM102-2 P: SSK not working > 2 boards.

    Many thanks all for the information.

  9. SM102-2 P: SSK not working > 2 boards.

    Hello. I'm having a problem our machine SM102-2 P (old machine). The SSK board is working well when we use only 1 board on any slots/boards (original 3 boards/slots). The board will blink like normal. The problem arise when we start to install back 2 or more boards. If 2 or more, the all board...
See more
Back
Top