Recent content by Mahoganybd

I'm printing envelopes landscape (manarch size) and the envelopes are jamming at the entrance. It seems like the feed wheel is off timing. Somethimes if feed partially before it jams. Have been printing these for a while but suddenly this frequent jamming has started. Cleaned roller, rebooted...

Hello, I'm having a problem with copies made from the printer or glass, the copies have a very light tint of magenta across the entire sheet. I put in a new Magenta IU, did a graduation and background stabilization test. You can notice it easily when you have about 25 printed copies in a stack...

My bizhub C450 has a fiery controller that seems to have stopped working. It's connected the the PC by a USB cable. Now when I turn on the switch, nothing happens. I also notice a that there's a Ethernet net port on the printer. Can I use this and bypass the fiery controller. If so, what do I...

I have a KM C450 with a fiery and USB connection, and using Win 8. Cannot get the print menu to select paper thickness 1,2,3 and different tray selections. It will only give me normal thickness and tray 1. The driver is KM C450 VPS; Tried the univeral driver but it does not work at all. When I...

Is there a driver for my KM C450; I have Win 8 and the driver that I found on the Fiery support site is KM C450 VPS. It print menu does not allow me to make changes, mainly paper thickness and tray selection. Any suggestions?

I have a Konica bizhub c450 with a fiery print controller. I bought this used and as it. The copier prints fine from the glass (so far) but I do not have a driver for it. I'm looking for the driver fiery x3ety-35c-km v2.0. I've tried searching online but have'nt had any success. Any...