Recent content by igen jim

Stiv We use XMPie with all of our variable projects we divide the into batches of 500 sheets. This works best for us in many ways. 500 Sheet lifts fit in the cutter. If the cutter operator miss cuts on batch we just down load that batch a reprint. 500 Sheet batches are easy to put up from the...

Try Ebay

I third papapascucci.

RMiGen The thickness has to do with the charge at Transfer and Temp of the fuser roll to seal the toner to paper.

NICE work Bud

Stiv Xerox makes a Pantone book with call outs. Called Pantone digital chips for Xerox iGen3. I think it's about $800. Hope this will help. Jim:cool:

ddigen3 and all Here is a trick I use for this one. 1. XPE-09-4301 & 4304 (happens during Xerographic Setup) 2. Print Engine Fault: Charge PR Residual Voltage Too High 3. Click RESET Do 106 color gamut just 10 sheets of paper though the press will take the charge off. Then do the 951. I do...

We follow ddigen3 #1-3 practice. I quit doing #4 sometime ago. When it comes to color correcting that would be the deference in having an operator or a pressman. Over and out Jim :cool:

On my 100 14.3x20.5 you'll love this one. XPE-06-3025, 3026 Standard chevron IOI registration phase failed to converge at outboard and inboard MOB sensors. Reset Reset Reset Reset. I put up with this for about month would happen up to 20 times a night. Xerox replaced the HAK twice and cleaning...

This happens all the time on my 110 14.3x22.5" XPE-10-3172 Fuser RDS slide motor failed to find home Reset

Howdy Everyone This is an FYI. We've been having issues with the HAK Filters. Changing daily. The rubber grommet will spilt and not keep a good seal. Our Tech's temporary fix is to cut one of the tubes from a PR Belt and place behind the filter to hold the filter in place. Got word today that...

Stiv Go to help and look up transfer overdrive. I have played with this in the passed. Your tech should some good info on how much to change the settings. Over and out Igen Jim

RMiGEN Thats works for some. Not for us. Stiv That what we do. Have Great Day Jim:cool:

So Stiv What ever happened with this issue? Jim