RYOBI 925 register on the 1st unit moves on its own from left to right

Discussion in 'Ryobi Printing Presses' started by Ikes Sheik, Jun 6, 2019.

  1. Ikes Sheik

    Ikes Sheik Member

    Joined:
    Jun 2018
    Messages:
    15
    Location:
    Durban South Africa
    Hi fellow printers, i have a Ryobi 925 and i am experiencing a problem with the 1st unit. On printing the register on the 1st unit moves on its own from left to right after it has been set to the other colours. Can someone help please.
     
  2. Warren Peace

    Warren Peace Member

    Joined:
    Feb 2019
    Messages:
    42
    Location:
    Houston, TX

    Hello, I'm not sure if this helps as it's a different press, but it might put you in the right direction.
     
  3. Ikes Sheik

    Ikes Sheik Member

    Joined:
    Jun 2018
    Messages:
    15
    Location:
    Durban South Africa
    Hi,thank you so much for your valuable input however the Ryobi that i have doesn't have the same system of registration as yours,all adjustments to registration is done from the work station at the touch screen computer.
    Your video was truly very informative.
    Thanks again!!!
     
  4. Warren Peace

    Warren Peace Member

    Joined:
    Feb 2019
    Messages:
    42
    Location:
    Houston, TX
    Not a problem, sorry it didn't help. I hope you get it fixed soon.
     

  5. ryobiTech

    ryobiTech Member

    Joined:
    Nov 2016
    Messages:
    50
    Location:
    the world
    Either end play in the cylinder or the servo motor is creaping.
     
Loading...