Xpe-09-4042

HVPS (Yellow) Over temperature.

This fault comes and goes. When it comes, nothing can get it to clear. When it goes, it will run for hours until it comes to a stop then its a hit or miss if it will start back up.

I go in to PSP, I then go to voltage meter and it shows the Yellow Station with a fault, I trigger the composite button, then do an immediate shutdown, switch off all the breakers then start back up.

It will come back 6 out of 10 times.

Although the error says over temperature, it isn't really that since the machine will sit all weekend powered off and first thing Monday the same error comes back upon release of the first job.

This past weekend, I came in Saturday, 4 hours of rinse and repeat and nada. Then I went home without printing a single sheet. I then came in Sunday as a shot in the dark and the machine started right up. Today same issue, won't run, nothing fixes it.

No telling if my steps are even helping, but I try to do the exact same steps that have brought it back before.

 

I love how my faults are usually the ones with 500 views and no replies lol. This machine will be the death of me.

 

LOL!!!!


Mine always has monday errors.

As far as yours goes, is the ventilation ok? Does someone turn off the a/c while your gone?

 

Error is upon startup. Regardless of temps. I have a "system" to get around it but it rears it's head randomly.

 

Wondering if anyone had any luck with this? I have the 4044 black over temp. Thanks in advance

 

Does your igen have the new style HVPS pwbs? The ones with the built in fan on the heatsink of the board?

 

We had to get a tech in to replace the transformer, back up and running, thanks!