Xerox 7000ap magenta density

[Hornrob]

Got an issue with magenta density it's fine at the back of the sheet (furthest away from the doors) and it's weak on the front of the sheet (near the doors) I've replaced the drum and the corotron and the ESV sensor ?

 

[MarkD]

Check adj the trimmer bar gap. If no joy rep the dev and and possibly the tank and then run Smile setup

--
Mark

 

[Hornrob]

hi mark,
Thanks for your help once again, sorry to sound so useless but where is the trimmer bar?
Thanks again, Rob

 

[Milo Wilson]

Be careful with the trimmer bar adjustment. If you adjust it too wide you can damage your drum.