Uv dryer issue

Hi all.im running anicolour sm52.my dryer unit has stopped working.the pressure gauge is reading 0 psi.so I'm assuming the water needed topping up.but when I tried this water just shoots out the over flow pipe and the gauge doesn't move.ive tried blocking the over flow pipe but gauge still doesn't move.any one got any advice.thanks

 

Hi what type of dryer unit do you have

Let me know, sincerely

Blessing

 

Hi just standard I.R sm 52 dryer unit. series of long bulbs you can pull entire unit out for cleaning.also water tops up via valve at side of press.but when I top up water shoots straight out overflow pipe.

 

Just a random thought, as I've never had a similar fault, but possibly a split diaphragm in the expansion tank, or hopefully it could just be the valve on the expansion tank that's knacked?
(it'll be a standard valve available from Halfords, if they're open a at the moment...)
Fingers crossed.

 

It's possible the manometer orifice is blocked. Sediment or mineral deposit. If the manometer is readily removable, you may try removing it and check for blockage. This is the standard Heidelberg dryer with the reservoir access under the OS of delivery, yes?

 

Where is the manometer exactly,and how do I remove it.

 

Pressure gauge.

 

What is the fault code on the display

 

Fault display reads. Dryer 1 05/3 excess temperature,sheet guide plate.

 

There is some blockage in water circuit, you should check it part by part

 

Silly question but what's the best way to do that.were do I start.

 

What is the machine year of manufacturing, to know the dryer model

 

Please double check the machine size, is it SM52 OR SM74 OR SM102?

 

You should check points from 4 (filling input) to 2 (pressure gage)
I hope it will be helpful for you

 

Ok, but need Mark of Dryer coming with Sm52:Baldwin +Grafix, Piller etc??
Blessing