Using PDFVT Files through Fiery Command Work Station with IGEN 150

[gaffer]

Hi,
We are having problems sending through PDFVT Files through our Fiery Rip. The Problem is that the Print Ready Variable Data PDF is A4 before dropping on to the Fiery, but as soon as it hits the Fiery it changes the Dimensions to 8.5 x 11' (or American LEGAL) I think it is.

Trying to impose this file through impose and changing it back to A4L in the Document Setting in Impose does not work as it looses the bleed settings and still produces it at the wrong size.

Any Feedback would be appreciated.
Steve

 

[robcairns]

Hi Steve,
I can't remember exactly where it is, but there is a setting that will automatically convert metric sizes to imperial and vice versa. If you print the printer settings page from the Fiery you should see where the setting is and go from there.

 

[gaffer]

Thanks Rob,

Found out that this is a bug in our Fiery Software as it works fine on our Versant. But Buy Defaulting the Held Q to the size I want for PDF VTs it now works a treat. Thanks for your post.

Best Regards
Steve