Trying to calibrate monitor to Rioch 901s

Discussion in 'Ricoh Color Laser Printers & Color Copiers' started by tedbragg, Oct 30, 2013.

  1. tedbragg

    tedbragg New Member

    Joined:
    Oct 2013
    Messages:
    2
    Location:
    Houston
    Just started at this shop, they run a Ricoh 901s. It's been years since I've calibrated to a printer -- last one was an Epson and they included a cal kit. This big piggie has none.

    Not calibrating the printer, just the monitor on my station so what I send to it matches better. Leans heavy toward blues and oranges -- well, let's not talk about that. :)
     
    tedbragg, Oct 30, 2013
    #1
  2. hvdh

    hvdh Member

    Joined:
    Dec 2013
    Messages:
    6
    Location:
    holland
    if you 901 has a efi controller you probably also have an ES 1000 densitometer attached to it and on the controller runs a version of efi "command workstation" here search for the calibrate button and follow the instructions.

    good luck.
     
    hvdh, May 20, 2014
    #2