The Wiki of Fault Codes!

Discussion in 'Xerox iGen3, iGen4, & iGen5 Digital Presses' started by ddigen3, Feb 2, 2011.

  1. Kevin82

    Kevin82 New Member

    Joined:
    Mar 2018
    Messages:
    2
    Location:
    Dartford
    Hi People,
    I have a fault on my iGen4 XPE-09-4741 Magenta discorotron grid to PR slope out of range.
    What i have done so far, complete shut down (press + fiery), PHSIP'd, changed wire's, grid and PR belt.
    I have gone into the service logon and have found that the grid voltage is fluctuating between 6648 down to 48.
    Anyone had this problem or know how to fix?

    PS. I also have another solution for the XPE-09-1100 time out fault that Iv seen on here, thats if you want to hear it.
     
  2. peels

    peels tree killer :)

    Joined:
    Dec 2010
    Messages:
    1,034
    Location:
    southeast iowa, usa

    9-1100 is my fave.

    I had an error like that, 4741 slope out of range... forgetting.... wire mods? here... when in doubt search your error....

    https://www.colorprintingforum.com/threads/xpe-09-4741.14178/
     

  3. Kevin82

    Kevin82 New Member

    Joined:
    Mar 2018
    Messages:
    2
    Location:
    Dartford
    Thanks for the tip but i had already looked at that thread ;)
    the problem was my ROS so had it changed and the problem has not come back........... yet :/
     
    peels likes this.
Loading...

Share This Page