Roland 200 slides Do not move at all

Discussion in 'Man Roland Printing Presses' started by samy1990, Apr 21, 2021.

  1. samy1990

    samy1990 Member

    Joined:
    Apr 2021
    Messages:
    15
    Location:
    syria
    hi
    slides motors do move at all !!... Fuse good
     
  2. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    1,903
    Location:
    Managua,Nicaragua
    Hi sir:



    1a)Test the power supply for Motor from the output of the Fuse, and see if there are o.k, according with the ID plate of Slides Motors.
    see if they are in tolerance 0.7% up or down, otherwise the power supply for Motor M280 Slides Motors.

    2) If there are NOT, look for the brige rectifier or Regulator voltage for slides motor, and see if there o.k or faulty, look for dry+colder joint solder in the board controllyn the slides motor.

    3) Recheck the Fuse, for bad contact ,and please use Deoxidising cleaner for all Connectors,+ wires , and tight very well.

    4) See if working


     
  3. samy1990

    samy1990 Member

    Joined:
    Apr 2021
    Messages:
    15
    Location:
    syria
    Thanks for reply, I checked the electrical nutrition and found that feeding is +15 volts that are not present, although the foses are ok, seem to be broken from the computer, I will open the computer tomorrow to see the reason
     
  4. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    1,903
    Location:
    Managua,Nicaragua
    ok, that you see Great ??

    See carefully, remember the ¨Common sense¨ is the most invaluable tool for troubleshooting!!;)


     
  5. samy1990

    samy1990 Member

    Joined:
    Apr 2021
    Messages:
    15
    Location:
    syria
    Yes this is a correct phrase
     
  6. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    1,903
    Location:
    Managua,Nicaragua
    You are welcome sir

    Blessing
     
  7. Daniel.Sanchez

    Daniel.Sanchez Member

    Joined:
    Apr 2020
    Messages:
    14
    Location:
    peru
    Is Roland 200E o tob
     

  8. samy1990

    samy1990 Member

    Joined:
    Apr 2021
    Messages:
    15
    Location:
    syria
    200
     
Loading...