QM 46 Errors error 1, 01-05

Discussion in 'Heidelberg Printing Presses' started by old school 52, Sep 5, 2018.

  1. old school 52

    old school 52 Member

    Joined:
    Apr 2014
    Messages:
    26
    Location:
    United States
    Can anyone tell me how to actually eliminate QM 46 errors, error 1, 01-05. and plate mount red light flashing, no plate on press. Thanks
     
  2. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    1,063
    Location:
    Managua,Nicaragua
    Hi sir
    the cause of mal function:
    Plate loading or ejection in PU 1 interrupted (e.g.
    emergency stop, guard open).
    Inch the press backwards until the button ”printing
    plate change” flashes. Press the button ”printing plate change and remove printing plate.
    Let me know
    Blessing
    superchock@yandex.com
    cell+WhatsApp:+505 8861 1441
     
  3. old school 52

    old school 52 Member

    Joined:
    Apr 2014
    Messages:
    26
    Location:
    United States
    Tried the above and have used this method before. Called the help line and followed this procedure.
    enter SF
    enter 3
    enter +
    enter 7
    enter +
    enter 92
    screen should read out/out
    if you have only one out
    enter + again.
    This should clear error 2 01-05
     
  4. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    1,063
    Location:
    Managua,Nicaragua

  5. old school 52

    old school 52 Member

    Joined:
    Apr 2014
    Messages:
    26
    Location:
    United States
    Yes Chock I did try your method,it did not work. Your method has worked in the past but I believe because the press did show an error the situation was different. I do very much appreciate you help.
     
Loading...

Share This Page