Q61 sm52

Hi all..
I have a problem with my machine. It stop running. And there is this q61 code on cpc.
Anyone know?

 

What cpc version do you have?

 

Cpc 104. Machine 200661. Now the code is disappear. But my machine is deadstop... Not running.. There is no eror code. I try to inching and there is no response. And i try to mannualy rotate and it not moving. And already check if there is something that stuck and not found anything

 

ok. sir
I Strong recommend you test the power supply:
1) test with DMM Input transformer 110Vac or 220Vac , must be in tolerance 10% up or down. is everything is goint test the fuse ad the input for 10Amp, is everything is o.k go the next steps:

2) +5vDC +8vDC +12vDC -8Vdc . all this voltage must be in tolerance 5% up or down, example if you are measuring +5vdc with DMM( digital multimeter) if you got 5.3 Vdc repair or replace the electronic board!

 

Ok thks for your information. I will try to contact my technician first. Ilet u know later