Problem with PQC of Lithrone 526 1990 make

Discussion in 'Komori Printing Presses' started by ashokkrmehta, Dec 3, 2018.

  1. ashokkrmehta

    ashokkrmehta Member

    Joined:
    Oct 2010
    Messages:
    38
    Location:
    20 balmukund macker road, kolkata 700007 INDIA
    Around 10 days back while the machine was under use we saw some smoke coming out from the 3rd unit and immediate after that PQC stopped working related to ink control. The registration, dampening is working.
    The local technician checked and informed us that the Cable from Black Box to the unit Short Circuited and wires mingled because of heat.
    The technician tried to check other units by changing the cables. It was observed that while ink key no 8 is operated motor of 13 No. Keys at Docket moves.
    My technician is helpless and can not do any thing.
    We are running the machine by manual Ink Control through Keys.
    Please advice what we are to do.
     
  2. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    1,175
    Location:
    Managua,Nicaragua
    Sir: I do not understand
    Can you explain me, more explicit please in order to advice you?
    1) It was observed that while ink key no 8 is operated motor of 13 No. Keys at Docket moves.
    2)We are running the machine by manual Ink Control through Keys
    Let me know
    Blessing
    superchock@yandex.com
    Mobile+WhatsApp: +505 8861 1441
     
  3. ashokkrmehta

    ashokkrmehta Member

    Joined:
    Oct 2010
    Messages:
    38
    Location:
    20 balmukund macker road, kolkata 700007 INDIA
    Dear Mr. Chock
    1) If we are operating from PQC for unit no. 3 and setting the ink for key no. 8 then we observe that in unit 3 ink key no. 13 at Ink docket moves.
    2) Right now we are operating the machine with manual setting of ink in all the units.
    3) We are unable to understand why the Cable short circuit happended ( What could be the possible reason)
    Thanks
    Regards
    Ashok Mehta
     
Loading...

Share This Page