Polar EM 115 error code 39

Discussion in 'Cutters and Trimmers' started by Att. Michael Bech, Oct 11, 2019.

  1. Att. Michael Bech

    Att. Michael Bech New Member

    Joined:
    Oct 2019
    Messages:
    1
    Location:
    Denmark
    Hi
    I'm getting this errorcode 39 every time we try to start our Polar 115.
    The error comes when we pas the reference point where the machine should be set the ref. point.

    Best regards
    Michael Bech
     
  2. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    1,543
    Location:
    Managua,Nicaragua
    Hi sir:
    Here is the error 39: Meaning
    Preset measurement reference
    point is larger than 76 cm or smaller
    than 7 cm. The erroneous measurement
    will be shown flashing in the backagauge position display.

    Remedy:
    Set reference point measurement correctly
    on the card TAM.
    Exchange Card AR
    Exchange Card TAM.
    Exchange CU Unit.
    Blessing
    superchock@yandex.com
    Mobile+WhatsApp:+505 8861 1441
     
Loading...