Please help to get right ink-water balance to get gray balance

Discussion in '4-Color Offset Presses +' started by Tuan3dpro, May 3, 2020.

  1. Tuan3dpro

    Tuan3dpro New Member

    Joined:
    May 2020
    Messages:
    1
    Location:
    Vietnam
    Hi friends,
    Could you please tell me what i have to do when I need to adjust TVI at the same time to get Gray balance as follows: Highlight (25%) needs to reduce TVI but Midtone (50%) and Shadow (75%) need to increase TVI.
    Thank you so much.
     
    Igor Kovalchuk likes this.
  2. Igor Kovalchuk

    Igor Kovalchuk Member

    Joined:
    Apr 2020
    Messages:
    12
    Location:
    Украина
    You must use RIP software and make ICC profiles for your Ink and after you always will have good result with gray and any colors. There is zero way for another solution.
     
Loading...