Plate Blinding on Lithrone

Try doing half the train to afford a “grip” so rubber to rubber contact occurs. Either gear side or operator side. Highly calcified rollers will slip, have seen it before

 

emet,
The photo is from a 29 Komori in the UK. Cleaning was done yesterday. The copper cleaned up well and a lot of paper and other muck is being cleaned out. Takes a couple cleaning to get it all out. IDK if they had any roller slip, but once the Calcium Slayer & Flush have an "in", it will work like the dickens. If The Slayer can't get through the slick barrier, chances are nothing else will.