OCE VP 6320 Registration

Discussion in 'Océ Digital Presses' started by Fixmypress, Mar 28, 2017.

  1. Fixmypress

    Fixmypress New Member

    Joined:
    Oct 7, 2011
    Messages:
    4
    Location:
    USA
    Need some help here.. We have 8 VP 6320's and for the most part they run very well. The issue I am fighting (Even with the tech's) is we run a lot of tabs and after about 500K the tabs start to sink into the document. Im told this is due to the tabs being on card stock and wearing out the TTF belts. The spec's show the press will hold a .5mm tolerance but the tabs are moving 2 - 3 mm each time.

    The fix is a service call to either reset the registration OR replace the TTF belts.

    Has anyone ever heard of this issue and if so what fix it (If anything)
     
  2. gavywill

    gavywill Senior Member

    Joined:
    Jun 13, 2012
    Messages:
    77
    Location:
    UK
    Use the Optimisation tool on the trays screen. Then that way you don't have to physically do the registration each time. When it comes to them changing the TTF unit then you can write down the settings that you used on screen from the last time. hope this helps...
     
Loading...

Share This Page