lithrone l-640 - looking for eyekom iv setup instructions

I have a lithrone l-640 i am looking for eyekom iv setup instructions we have reconnected the side guides ( they never worked,the press was bought second hand ) now we are trying to get them working.

 

Be careful when adjusting the trim pots. They can easily be broken loose from the circuit board.

One problem concerning the Eyekom IV side guide detectors was that on the early models, the static feeder eliminator wire was run adjacent to the wires going to the Eyekom causing the alarm to sound. If this is the case, move the high voltage wire to the drive side of the feeder.