Komori Semi Automatic Plate change

Discussion in 'Komori Printing Presses' started by ballykea, May 11, 2017.

  1. ballykea

    ballykea Senior Member

    Joined:
    Feb 2008
    Messages:
    179
    Location:
    Pennsylvania
    We have bought a Komori GS 228P with Komori Semi Automatic Plate change. Can anyone advise if this is the same as the standard SAPC? I haven't been able to find manual to describe. Is it the same, better? or worse?

    Thank you.
     
  2. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    570
    Location:
    Managua
    See if the mechanism is Mechanical, vs use Pneumatic piston version
    in SAPC, that the little difference Early version Mechanic vs Pneumatic
    Regards
    superchock@yandex.com
     
  3. ballykea

    ballykea Senior Member

    Joined:
    Feb 2008
    Messages:
    179
    Location:
    Pennsylvania
    Thanks will have them check.
     

  4. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    570
    Location:
    Managua
Loading...

Share This Page