Komori delivery timing issue - HELP

Discussion in 'Komori Printing Presses' started by Toragrafix, Nov 25, 2015.

  1. Toragrafix

    Toragrafix Member

    Joined:
    Nov 2015
    Messages:
    5
    Location:
    Los Angeles
    We had a bad crash in our delivery with a severely bent gripper bar. We got it straightened and put back together and now the timing seems off. All of the delivery grippers hit on the transfer cylinder. We have a coater and extended delivery. Is there an adjustment for the timing between the press and the delivery? Our old Akiyama had something.
     
  2. Meny

    Meny Senior Member

    Joined:
    Apr 2008
    Messages:
    772
    Location:
    Israel
    what model of Komori is it ?
     
  3. Toragrafix

    Toragrafix Member

    Joined:
    Nov 2015
    Messages:
    5
    Location:
    Los Angeles
    Model

    Lithrone 528.
     
  4. jef

    jef Member

    Joined:
    Oct 2015
    Messages:
    36
    Location:
    canada
    gripper bar

    The cam on gripper bar might need adjusting.
     

  5. JeffreyAllan

    JeffreyAllan New Member

    Joined:
    Dec 2015
    Messages:
    1
    Location:
    Portland, Oregon
    I'm replying from my phone so this will be short haha. Hopefully this will do it.
    Open catwalk to coater back cylinder (delivery side). On the drive side you'll see the gear that drives the delivery chain. Reach down between the frame and the gear and you should feel bolts going into the gear. Loosen those and you'll be able to move the bars into position. Make sure your chain is tight as well.
     
Loading...