Heidelberg SM74 ErrorTTK and BLT con

[Mathew]

Unfortunately resoldering did not help.

It was clear for me that it will not help.

 

[CHOCK]

ok.

What about the power supply measure +Tolerance, need to see it, send me Pics please?

1) Perform a visual inspection : look for loose and broken wires, improperly seated connectors, loose or broken wires
misset switch, missing jumpers. and so on.
Chech for obviously damaged component(components burned or discolore due to overheating);
Dust + dirt + tear +wear

2) Reseating Boards and components:
Edge connectors are a common souorce of problems. Power down the system and remove the PC boards. Examine the edge connector
for contamination and clean with contacts cleaner contacts. Reseat any loose components such as scoketed ICs) . Reseat the
boards and power up.

What about this step ?????

Please do it, carefully.

 

[selimcan]

Hi
I have a 2005 sm52-4 machine and this error code is the same. What did you do as a solution?
Thanks.

 

[Adil]

Hi sir
Check your uvm card board it can be defective

 

[CHOCK]

Hi sir:

*Check:
Defective brake control . SLT_CON

 

[selimcan]

Thank you, UVM control and brake control were performed. The electronic technician suspects a motor fault, but there are people with opposing views.

 

[Adil]

Dis you remove the encoder ??

 

[selimcan]

A new encoder was tried and the problem was not resolved.

 

[Adil]

When you remove the encoder did you enter the main motor serial number on the menu ?

 

[selimcan]

Evet motor numarası girildi.

 

[Adil]

I don 't understand ??