Heidelberg MO CPC 1.03 Error 80

Hey there, i wonder if anyone can tell me whats the issue or diagnosis for error #80 from CPC 1.03 from my Heidelberg MO.

The malfunction consist that the CPC don't move the ink keys motors and don't respond at all the command, the little red led lights doesn't move either and appears like it's stock.

Hope you can help me !

 

Can you give me more details about your machine?
How many units?
Year of manufacture?

 

hello sir, please can you show us some pictures thank you very much

Regards,
crush

 

DEAR SIR I HAVE AN ISSUE TOO WITH MY MOVS CPC
I'm not able to select printing units 2,3&4
The CPC is stuck at 1

 

Power off, reset (unplug and plug back in) all boards. Problem may be caused by poor contact of pin connectors of boards.

 

I have tried it more than 3o0 times but still it doesn't do what it's supposed to

 

Is there an error code showing on the 1.03?

 

yes sir it start with 5 then 57 and stuch at unit 2,3 and 4

 

hello dear sir checked the cards sius the desk and the register hubs including the motors of the ductor.

 

If your console is showing error code 57, my old documentation translates that to "REK 2 cannot emit CPU-ON". What that means exactly, I cannot be sure, but it may be safe to say the REK (mother board) is faulty. Some of the old CPC 1.03 consoles were equipped with two REK boards, I'd check to see if you have the spare, and if so, interchange them.

 

thank you sir

 

ok sir let mech check

 

i will appreciate if could get the copy of the error code in picture form or any how so that we can follow closely with my technician it is the only machine we depend on and some job pending awaiting the solution kindly assist

 

thank you very much sir let me work on it ma God Bless you so much

 

Good Luck, my friend.