fuser drive NVM

Discussion in 'Xerox iGen3, iGen4, & iGen5 Digital Presses' started by peels, Feb 11, 2020.

  1. peels

    peels tree killer :)

    Joined:
    Dec 2010
    Messages:
    1,096
    Location:
    southeast iowa, usa
    All, cant remember if i ever made a thread on this... but its happened before... I just upped the fuser speed....

    whats happening is, it LOOKS like the paper is entering the fuser slower than the pre fuser vacuum transport is pushing it in, and wrinkles up into the bottom of the oil tray... Causes smudged image on inboard trailing edge.

    anyone else ever have this?
     
  2. Milo Wilson

    Milo Wilson Senior Member

    Joined:
    Dec 2007
    Messages:
    436
    Location:
    Arkansas
    Yes, I've seen that. There's a DC program that adjusts the prefuser transport speed in relation to the pr belt and fuser.
     
    peels likes this.
  3. peels

    peels tree killer :)

    Joined:
    Dec 2010
    Messages:
    1,096
    Location:
    southeast iowa, usa
    yeah I fiddled with it again and got it to stop smudgin ;)
     
Loading...