Feeder block Offset roland 700

Discussion in 'Man Roland Printing Presses' started by elhamid, Jun 3, 2023.

  1. elhamid

    elhamid New Member

    Joined:
    Dec 2019
    Messages:
    4
    Location:
    algeri
    Feeder commands are locked and console screen displays error 134653
     
  2. Sandeep kumar

    Sandeep kumar Senior Member

    Joined:
    Jan 2018
    Messages:
    124
    Location:
    Gurgaon
    Send me some error picture
     
  3. elhamid

    elhamid New Member

    Joined:
    Dec 2019
    Messages:
    4
    Location:
    algeri
    (attempt to translate)

    134653
    battery (?) on the battery (?) door plate (?) too heavy
    proceed to zeroing controller
    synchronize machine feeder 180 degrees
    thank you
     
  4. Sandeep kumar

    Sandeep kumar Senior Member

    Joined:
    Jan 2018
    Messages:
    124
    Location:
    Gurgaon
    Not able to understand what you wrote
     
  5. elhamid

    elhamid New Member

    Joined:
    Dec 2019
    Messages:
    4
    Location:
    algeri
    This is a malfunction on the roland 700 offset at the loader table level blocking up and down. And error displayed on the console screen 134653 ... paper stack feeder on door plate (stack) too heavy and it is displayed on screen like this. And thank you.
     
  6. Sandeep kumar

    Sandeep kumar Senior Member

    Joined:
    Jan 2018
    Messages:
    124
    Location:
    Gurgaon
    You can check some limit switch is faulty or wrongly pressed
     
  7. drukman

    drukman Senior Member

    Joined:
    Mar 2016
    Messages:
    300
    Location:
    Bulgaria
    There is no more incomprehensible translation. The original diagnostic language for Roland machines is German. (?),(?),(?) is of great importance. If you want us to help you, take a screenshot of the errors. Best in German.

    PP.
    It is good to write at least the year the machine was manufactured. 1991 or 2023. There is a "small" difference.
     

  8. elhamid

    elhamid New Member

    Joined:
    Dec 2019
    Messages:
    4
    Location:
    algeri
    Année 2013
     
Loading...