Eyekom IIA Need help

Discussion in 'Komori Printing Presses' started by Graficabc, Mar 29, 2017.

  1. Graficabc

    Graficabc New Member

    Joined:
    Mar 2017
    Messages:
    1
    Location:
    Buenos Aires Argentina
    I need information, instructions, manuals, circuits for EYEKOM IIA instaled in KOMORI L-25B. What "Double sheet detectors" setup?
    The problem is that after passing 5 sheets the machine stops, with any type of paper.
    Thanks
     
  2. Bill Borcicky

    Bill Borcicky Senior Member

    Joined:
    Jul 2012
    Messages:
    211
    Location:
    U.S. Amory, Ms.
    Many years ago, I run a Komori Kony. The eyekoms on that press were bad about the plug in coming loose. Sometimes oil and grease would fall on them. I would have to clean out the plug in with electronic spray cleaner. I would mess with the settings for 30 minutes and nothing. After I cleaned/ checked the plug ins , then I learned to set the settings. Check double sheet setting then both sides of headstop . If the wheels/brushes are not on the tail edge the paper will not reach the headstop evenly and throw the press to stop feed.
     
  3. hello.vijay78

    hello.vijay78 Member

    Joined:
    Apr 2011
    Messages:
    17
    Location:
    india
    Did the machine stops with some errors?
     
Loading...

Share This Page