Change anilox SM74 year 2005

Discussion in 'Heidelberg Printing Presses' started by Bao, Mar 10, 2020.

  1. Bao

    Bao Member

    Joined:
    Oct 2019
    Messages:
    8
    Location:
    Vietnam
    How can we change this anilox roller.
    Please help me.
    Many thanks.
     

    Attached Files:

  2. turbotom1052

    turbotom1052 Senior Member

    Joined:
    Oct 2008
    Messages:
    814
    Location:
    Vermont
    not sure about a Speedmaster 74 but I know that on a 102 there is a Heidelberg tool that comes with the press, that consist of 2 metal hooks, with handles attached. After opening up the pillow block, you get a person on each side with hook and CAREFULLY pull the anilox roller out of the block. Look around in the presses tool box and hope that you have the hooks. If not you could probably improvise with some strong nylon rope.
     
    Bao likes this.
  3. Bao

    Bao Member

    Joined:
    Oct 2019
    Messages:
    8
    Location:
    Vietnam
    Thanks sir.
    I have tool 2 metal hooks and manual guide catalogue in touch screen. But i can't do it.
    Before i know speedmaster 75 very easy for change, but 74 not same.
    Many thanks sir.
     
  4. turbotom1052

    turbotom1052 Senior Member

    Joined:
    Oct 2008
    Messages:
    814
    Location:
    Vermont
    I think you will need to better describe just where the problem lies.
     
    Bao likes this.
  5. Beguin

    Beguin Member

    Joined:
    Jan 2020
    Messages:
    5
    Location:
    Côté d'ivoire
    please be more explicit, show us on the image what you wanted to do.thanks
     
  6. Bao

    Bao Member

    Joined:
    Oct 2019
    Messages:
    8
    Location:
    Vietnam
    Thank you sir.
    I want to know how i can take out the anilox roller.
    If you know you can teach for me by image or video clip.
    Many thanks sir.
    Have a nice day.
     
  7. turbotom1052

    turbotom1052 Senior Member

    Joined:
    Oct 2008
    Messages:
    814
    Location:
    Vermont
    I would think that the process for removal should be clearly laid out in the presses operators manual. If you do not have such a manual I would strongly suggest that you get one.
     

  8. mcsongor

    mcsongor Member

    Joined:
    Oct 2014
    Messages:
    32
    Location:
    romania
    dismantle both sides carefully everything is in your way......take out old anilox.....place in new anilox....assemble everything back in original position...check nip width...enjoy printing...
     
    Bao likes this.
Loading...