Can't get PQC to communicate with KMSIV

Hey everyone,

We had an unfortunate failure with our print console computer for our 2001 Komori 528 + coater, so I went ahead and installed KMS IV on a newer Windows XP machine. In doing so, I also moved over the CP-114 com serial card from the older machine, left everything untouched in terms of the jumpers and dip switches.

I also made sure I copied over the same settings for KMSIV, but for some reason it will not communicate with PQC. If anyone could please help, it would mean a lot to me, thank you in advance

Tom

 

Well in case anyone was wondering, I was able to get things to finally work by playing with every single setting in System Tuning. It turns out the press type and pqc had incorrect settings when I loaded a newer KMSIV, I also had to choose "Other" from "PALS-II".

Thanks anyways...