Can you interleave on a 5500?

Discussion in 'HP Indigo Digital Presses' started by bassjase, Mar 6, 2018.

  1. bassjase

    bassjase Member

    Joined:
    Nov 2011
    Messages:
    9
    Location:
    Reading UK
    I have a job that needs to be separated into 100 sheets sets.
    Is there a way of interleaving on the 5500?
    Its a 2 page, uncollated job, but when I put the quantity in, it wont let me say either 'interleave' or jog over every 100 sheets.

    Is there a way this can be done?
     
  2. FFR428

    FFR428 Senior Member

    Joined:
    Feb 2008
    Messages:
    413
    Location:
    CT
    Interleave? please explain. If you want to offset jog a 2 pg with 1 page at a time in 100's and not collated you can. Dbl clk on job this shows you job prop. General tab you see sheets range on right hand side of screen. click "from" and enter sheets 1 ans 1 again. then click apply Then next tab to stacking. click jog offset between 100 sheets in you case and click apply. Repeat for 2nd page. Not sure if this is what your asking but let me know?
     
  3. bassjase

    bassjase Member

    Joined:
    Nov 2011
    Messages:
    9
    Location:
    Reading UK
    That would work, thank you. What I was actually after was a way of printing 2 sheets, uncollated, say 800 of each sheet, but 'insert' an extra sheet every 100.
    Jogging the sets would work though. Thank you for reply.
     
  4. FFR428

    FFR428 Senior Member

    Joined:
    Feb 2008
    Messages:
    413
    Location:
    CT
    There's a way to do that also. slipsheet is what I call them. Prints a diamond pattern in yellow on a print cleaner sheet. Will look today and lyk. don't do that often.
     

  5. bassjase

    bassjase Member

    Joined:
    Nov 2011
    Messages:
    9
    Location:
    Reading UK
    Thank you. That would be really good. I really appreciate your help
     
Loading...

Share This Page