09-1100's killing me all of a sudden.

peels

tree killer :)
Joined
2010
Posts
1,113
Geo
southeast iowa, usa
don't know why... running fine, don't see other errors. then gets stuck. run 951 or reboot. runs for awhile.. etacs, mob and patch generator cleaned.

making me crazy. Magenta density seems to drop out a little over time too.

got an inline spectrophotometer fault once.... annnd just got a press fault. and restarting again.

any hints?

is it the weather? lol
 
when it fails at 951, it's during convergence.

think im done for this morning its not coming back. :(
 
  • Uh-oh...
    09-1100 is the cursed "something's wrong, but I'm not gonna tell you what" fault.

    It could be any little thing. I had one once where a heat blanket (whatever that actually is) on yellow was going out. Took the tech 3 days to find that one.

    If you look in the 100 Log Only faults in PSIP->Admin do you see anything particularly weird?
     
    Uh-oh...
    09-1100 is the cursed "something's wrong, but I'm not gonna tell you what" fault.

    It could be any little thing. I had one once where a heat blanket (whatever that actually is) on yellow was going out. Took the tech 3 days to find that one.

    If you look in the 100 Log Only faults in PSIP->Admin do you see anything particularly weird?

    funny you mention that. had a single "cyan heat blanket" fault. didnt repeat thought.

    Full reboot cleaned EVERYthing while it was asleep yesterday, 951, mob, trc. and its still cookin. (for now)

    possibly super dry weather, aging dicors...? It was COOOOOOLD. warmer and more humid today with melting snow....

    thats what Im going with, hope it doesnt come back.
     
    DRY weather will do it !!!!!!! what is the humifdity in the shop...
     
    DRY weather will do it !!!!!!! what is the humifdity in the shop...


    its dry enough that I could probably charge my phone by petting my mom's cat.

    visible sparks when I pick a stack up off the tray bad. LOL

    think it came down to that, and a filthy patch generator.
     
    Forum posts represent the experience, opinion, and view of individual users. The Color Printing Forum does not necessarily endorse nor share the view of each individual post. When making any potentially dangerous or financial decision, always employ and consult appropriate professionals. Your circumstances or experience may be different.
    Back
    Top