triumph

Hello, It's been almost 2 years since I got my triumph. But starting from last week I don't know what happened. When I turn on the switch, the screen blinks and goes blank. I checked my breaker and everything is fine. Then I found out that F3 (Backgauge overload switch was off) so I turned it...

Hello, I cut bundle of 500 paper length of 32 cm to 29.7.cm When the blade come down, the rest of the cut is moved to the left and went into the slot on the left side on surface of cutting. That block the knife. Then I pulled out the rest of the cut, and cut the paper to the end, but after...

Hello all - I recently replaced the disc brake on the blade motor of my Ideal Triumph 4850-95. Since the repair it seems to be traveling better on the trip down, however the only way I can get the clamp and blade to return to the top position is by opening the safety cover. It is not...

IDEAL 4850-95 (TRIUMPH) Travel Fatigue!! Recently sent 4850-95 Guillotine from Germany to a printer friend in Lusaka, Zambia. Machine travelled approx. 2 months in a container through Germany and the icy North Sea, then through hot Namib Desert to Lusaka. On arrival in Lusaka, my friend...

I am selling my Triumph 5551-06 EP Programmable Hydraulic Cutter includes high storage capacity programmable “EP” back gauge control module with 10 button keypad and LED display. It stores 99 programs, up to 99 steps each (up to 9 repeat cuts can be integrated into a program in a single step)...

THIS IS THE SAFEST CUTTER ON THE MARKET!! Triumph 5551-06 EP Programmable Hydraulic Cutter includes high storage capacity programmable “EP” back gauge control module with 10 button keypad and LED display. It stores 99 programs, up to 99 steps each (up to 9 repeat cuts can be integrated into a...

Hi All, I have an MBM Triumph 4850-95 that seized up mid cut and I am trying to figure out is going on. I recently changed the blade, and right before this happened I noticed a little grinding sounds and some metal dust in the right side of the cutter opening. It was a bright dust - so I am...

The Triumph 5550 EP paper cutter is one of Ideal’s programmable Hydraulic paper cutter. The enhanced capabilities of this cutter include a hydraulic blade with precision swing-cut blade movement and adjustable hydraulic clamp drive. This hydraulic clamp tightly holds the paper stock along the...

Can someone please help? I am in the middle of moving my digital print shop from one location to another and low and behold I forgot to measure to entry door, and of course my cutter will not fit - Triumph (MBM) 5550-EP. My questions is how difficult is it to remove the backgauge on the cutter...

This cutter has a 22'' Blade. It is an electric cutter with an analogue gauge readout. The clamp is manual. I am selling this, so I can make room for a hydraulic or a fully auto with digital readout that cuts 1 out on 13 x 19. I use this to cut 24# bond and 10 pt c2s cardstock without...

Can anyone be so kind as to post the meaning of common error codes that appear on the lcd of ideal triumph EP cutters?

I have the following pieces of equipment available for sale: Ryobi 500N - crestline, T-51 swingaway with power lift, landscape, pull guides, single phase 220V, good press for 4 color work. Ryobi 2800 - Kompac water system, chute delivery ABDick 360 - 2 color press/T-head, chain...

What's the best place to have my Triumph Ideal guillotine knife blade(s) sharpened? There is no local knife/blade sharpener, so whoever I choose, the blades will be UPSed in the small wood crate so location isn't that important (I'm in Michigan)

Anyone have an inexpensive source for good quality cut sticks for an Ideal Triumph 4850-95 Cutter?