streaks

I Have a Workcentre 7775 that has some print quality issues and I'd appreciate any advice going on what the cause is likely to be. Attached is a copy of the Drum Test. I switched the Cyan with Yellow drum and the lines are yellow after printing. I also see the lines pattern on the transfer belt...

Dear xerox experts, My xerox DC 260 printer has a cyan process direction streak problem. When printing a 960-SRA3-click job (80 booklets) the first 4 booklets (48 clicks) come out fine. In the 5th booklet however a massive streak suddenly appears in the bottom of the page. After several...

Hi, we have some problems when printing silk coated paper. After printing 2000 sheets, there are streaks and ghost images on the prbelt. The techs say it is rhe oil coming back again on the belt during the second side is printed. The only way is to change the belt or to change the paper. But...

Running a '99 cd 102 for ever. getting roller (gear?) streaks in units 1&6. Haven't had this issue until recently. new rubber in both units, but still can't eliminate. what has happened? Can't figure it out. Solids suck. Can anyone offer help?:eek:

Hi, i am new here. I have a 1997 qm di 46-4. When trying to run a one color letterhead with a 2 inch wide solid bar all across the top of the sheet....i get gear streaks over the whole blanket and they do show up on the printed sheet. First i tried the #4 unit (yel) and then tried the #2 unit...

my problem is related to gear streaks or horizontal banding.... in my Adast A3 size machine i was experiencing a gear streak problem. but thanks to this forum i was able to eliminate it totally by adjusting the JR distance in my gear wheels after putting low profile blanket. i should...

We are facing problem of roller streaks in Cyan unit(both upper & lower side) on our 1996 model Mitsubishi L-750S Heat set machine. This problem is more prominent in highlight area & increased speed beyond 15000iph. Press has Dahlgren dampening system. All roller were changed 1 month back only...