ink problems

  1. Ink in winter

    My machine man use ink reducer in winter but I see matt effect and not good finish at all please help that what should we do in winter as per ink is concern and we are using heidelberg
  2. Heidelberg SM74 5 colour 2005 INK STRIPPING

    We have recently run a job and I noticed the magenta unit was stripping across a cyan solid, Anyone have ideas what has caused this and how I can prevent it from happening again? Many Thanks BHF Graphics
  3. Packaging Print

    Hello everyone, I'm relatively new to this industry so please bare with me. I'm currently working for a corrugated packaging company who use quite an old 3 colour printer slotter. I work in the design department, not out on the actual machine. I have an enquiry sitting on my desk for some...
  4. transparency adhesives

    Hi guys, need help urgently here. I'm doing a project that involves printing some detailed designs and the medium i'm using is a flexible substrate that wont adhere to inkjet printer inks. Now, the reason i want to use my inkjet printer is because it is quite new and it utilizes ink very...
  5. Reflex Blue issues

    Hi there everyone. At the moment every time i run a reflex blue job it seems i have to get loads of ink on at the start to get the correct colour then spend the whole run turning the sweep down as it stays heavy otherwise. The colour is settled and it runs for a couple of hundred then i am...
  6. Genius drying problems!!!!

    Looking for suggestions here on drying problems! We are using TOYO Aqualess inks and we can not seem to get a good cure with our Black ink on our backs! we are running on PVC substrate and need a solution or just some help in the right direction. Our substrate manufacture also checks the Dyne...
  7. Ink Slinging

    I have a problem with yellow and cyan ink building up on blankets, transfering to impression cylinders and then dripping on sheets. using hostman- steinberg inks, prisco ctp fountain solution mixed with r.o. water, on a 2006 105 XL. any help would be appreciated.
  8. Ink Flaking

    While running CMYK on some of my machines mostly the Harris 1 color and SORKZ 2 color on Kromekote. Areas with all colors CMYK mix, once dry I am finding Flaking on the black and sometimes other colors also. Any Suggestions???:P
Back
Top