ideal

I have an IDEAL 5221-90 gullotine paper cutter. Yesterday it was working fine but today as the clamp came down, it refused to go up. When i press the button all it makes is a clack sound and that's it. I have no idea where the electrical panel is located as i read somewhere on the forum that...

Hi, I'm getting an ERT04 error on my 5221-95EP Guillo, from what I've been reading its likely to be related to the potentiometer, but I'm unsure of the correct diagnostic procedure for this particular machine (it seems to vary from model to model). If anyone could help with some info or some...

Does anyone know how to reset the Micro Switch 18 error on an Ideal 5260? Our blade is stuck in the down position and the screen shows the error when we press the reset error on screen nothing happens.

So I have only been able to find solutions for the clamp/knife being stuck down, but I am stumped on this one. Ideal 4850-95 EP took off electric cover, K1 and K3 both go down when buttons are hit, but nothing happens. when I manually hit K2, there is a terrible whirring sound, like the motor...

Hello, We got a second hand machine, a Ideal 5221-90. It worked fine, untill now. When pressing the lower the clamp buttons, the clamp doesn't come down anymore. It makes the "click" of the switch, but nothing happens. When forcing it through the contactors, the clamp goes up and down. And...

hi everyone, i have problem with my ideal 5260 paper cutter. in process of cutting both clamp and blade stuck in down position. fuses seems to be ok, overload switches (blade drive/clamp drive/backgauge drive) stick out some 4~5mm so i'm not sure if it's ok (when pressed they return to same...

Hi there This is my first post: thanks in advance for the help! I have an Ideal 5250, had it for about 3 years, been regularly serviced and blade changed every 6 months or so. All been fine with it, until recently: it seems that when in the home position, the blade is around 0.5-1mm lower...

Hello, I cut bundle of 500 paper length of 32 cm to 29.7.cm When the blade come down, the rest of the cut is moved to the left and went into the slot on the left side on surface of cutting. That block the knife. Then I pulled out the rest of the cut, and cut the paper to the end, but after...

Hello all - I recently replaced the disc brake on the blade motor of my Ideal Triumph 4850-95. Since the repair it seems to be traveling better on the trip down, however the only way I can get the clamp and blade to return to the top position is by opening the safety cover. It is not...

IDEAL 4850-95 (TRIUMPH) Travel Fatigue!! Recently sent 4850-95 Guillotine from Germany to a printer friend in Lusaka, Zambia. Machine travelled approx. 2 months in a container through Germany and the icy North Sea, then through hot Namib Desert to Lusaka. On arrival in Lusaka, my friend...

Hi, I've recently acquired a second hand Ideal 4700 Manual Guillotine. It cuts well along the length of the cut, but if I try to cut a stack of paper (anything more than 3-4mm high) then it cuts diagonally down the stack, so that the bottom sheet is much narrower than the top sheet, if that...

Can anyone be so kind as to post the meaning of common error codes that appear on the lcd of ideal triumph EP cutters?

hi anyone able to help,i have an ideal 5221 and lately when i press buttons to cut the blade comes down but stops when it contacts the paper,it cuts eventually but only after numerous trys

Cutter - IDEAL 4850-95EP http://www.asiapacific.com.my/abm/ideal4850-95e.html Printer - Canon CLC 4000 with Color Pass Z6100, High Capacity Stacker TS-100, 3500 sheet Paper deck R1. http://www.solutions.canon.com/Brochures/color_CLC4000Brochure.pdf please email me at...

Hello everyone. I am new here and I work for an international printer manufacturer. We design and build 4 color printers and pre-press machines, including CTP. Recently at one of our meetings, the question was posed "What do our customers want?" While this seemed like a silly question, the...

What's the best place to have my Triumph Ideal guillotine knife blade(s) sharpened? There is no local knife/blade sharpener, so whoever I choose, the blades will be UPSed in the small wood crate so location isn't that important (I'm in Michigan)

Anyone have an inexpensive source for good quality cut sticks for an Ideal Triumph 4850-95 Cutter?