fuser

iGen 150 user. So this is very weird, I can go into the component control and I engage the web motor and it is clearly turning, but whenever I run a print job, the web isn't moving at all. I've been monitoring it all week, and it's the same thing every time. I've changed the NVM values to...

Hi i'm new here, I just acquired an xante ilumina, was wondering if there would be any implications to use an OKI equivalent fuser which appears to be much cheaper? If that's ok which OKI model?

Hello, I have a problem with my C452, I have scratched one of the rollers of the fuser. I teared a small scratch on the roller. I went in two shops to find a way to replace the part but they tell me different things so I ask for a little help since no service manual explains it. On the...

Came in this morning, and the switch to fuser web assembly was lying on the press with a note from my co-worker. Does anyone know exactly where the switch goes??? I would like to put it back in, and try putting a piece of tape on it until tech gets here to install new one.

I manage a Creative Services department that uses a Xerox 7760 for proofing and some short-run production. Recently, we started printing window clings for some clients. However, the color quality of our 7760 varies wildly between paper (where everything looks great) and the adhesive vinyl sheets...

Hello, I have had one problem after another since my service contract ended. I had to replace the black drum because of streaks on the paper. That cleared up. Then I lost communication with the printer completely. The box on the back of machine has an LED which is usually showing 88 or 00. When...

Up until September 2008, I had been using Fuser Fluid I (008R12936) then we were introduced to the new version, Fuser Fluid II (008R13030). I believe our techs had come in and performed some upgrades and retrofitting inside my iGen as well. I almost missed the upgrade of the Fuser Fluid, except...

What advantages does a machine with a new style belt fuser have? Are there advantages or tradeoffs that make a tried and true roll fuser design better for some prints or reasons?

How do we know when the fuser unit in our Canon IR3220 needs replacing? We were advised to keep one on hand, which we have, but nothing about when to change it. Lately, ink on large solids feels rough and sometimes flakes off. We normally run 12 x 18 Mohawk 100# dull coated text, two-sided, or...

Does anyone know of a company that will rebuild (replace pressure and heat rollers) EP-82 Fuser/Fixing Assembly for noticably less than retail/ebay price of fixing assembly new?