Anyone here know a source for scented overprint varnish? I know there are companies that will print and use scented varnish but was looking for a...
Cleaning out the studio today and realizing I have to let this beautiful Hamilton California Job Type cabinet go because I need the room. It’s 6ft...
I definitely will. We hope to make it back this year. Good luck with the press.
Sorry I meant to address that. That's normal otherwise you might flood the system with fountain solution. What I've done before is, mainly if I...
seanryder-I grew up in London until I was 15 in a place called Earls Court. Then I moved to the States. I lived in Devon most of the last 27 years...
Ten clicks on the metering roller is a good place to start when rollers are new. I'm not the operator of our 3304HA anymore. I did run it since it...
Its a good system. Use good chemicals (distilled water, fountain concentrate, alcohol substitute). Use best water rollers you can. The metering...
Aberg3860, where abouts in NW florida? My wife and I vacation in Pensacola Beach fairly often.
Definitely Kompacs. Especially if your printing isn't super critical.
Well when we were really busy we'd change water rollers every year and ink rollers every two years. But now that we've moved a lot of smaller runs...
The Ryobimatic system can be finicky but well maintained (replace rollers regularly using OEM products) will give better results. OEM rollers are...
I know this a really old thread but we use Numbering Star software. It'll do what you want.
Chilling the fountain solution is critical to the Ryobimatic dampening system. Should be @ 51degrees F. This in turn will affect the conductivity...
Crestlines or Kompacs are a huge waste on this machine. The original water system with the press is really good if you're willing to take time to...
It would help to know exactly what problems as well as which press you have: 3304, 3304H, 3304HA? Does it have the PCS console? Ryobimatic water...
We have a 3304 HA with the same water system. The lever to disengage the metering roller should not move the metering roller side to side, just up...
OEM-Original Equipment Manufacturer. I've tried the aftermarket(syntac, lithoroll etc.) and they are hit or miss, usually miss. The OEM rollers...
Addressing the fit issue. I've run the 3304HA which has semi automatic plate loaders which if kept clean, lubed and zeroed out will give excellent...
We find that aftermarket water rollers are basically garbage. The oem rollers are expensive but will run way better, especially the metering...
No problem. Its a trick we've been doing for years. Just noticed you're in Covington, I'm in Lafayette by the way.