Search results

  1. Martin1000x

    POLAR EMC 92 MONITOR error SCAN REFERENCE POINT

    Hi we are having the same issue with our Polar EMC 92 Monitor . when you switch it on, the machine request SCAN REFERENCE POINT . when you activate the wheel, it calibrates then goes to the previously used program. When you start cutting, it will just prompt for SCAN REFERENCE POINT. we checked...
  2. Martin1000x

    SM 74 4+L ink fountain zone display diodes not turning on

    Ok i will do all that and get back to you
  3. Martin1000x

    SM 74 4+L ink fountain zone display diodes not turning on

    when the machine is turned on , after the cp tronic start up. it goes to the production page. no errors or faults are displayed.
  4. Martin1000x

    SM 74 4+L ink fountain zone display diodes not turning on

    Hi . the machine has not been running for a long time. but we made sure to turn it on at least once every week just to keep batteries charged up
  5. Martin1000x

    SM 74 4+L ink fountain zone display diodes not turning on

    Hi Guys we have a Heidelberg SM 74 machine where the ink fountain zone display diodes on the CP Tronic 1-04 are not turning on even after , selecting an individual printing unit from the production display or selecting the light pen function within job preparation. percentual adjustment of the...
  6. Martin1000x

    Heidelberg SM 74 4 2002 cp2000 inkzone eror

    Hi Guys. We also have the same problem on our SM 74 4+L. Only the disable diodes are coming on when the order is being set. when the job is sent to the machine and the press running, we do not get the coarse and fine diodes . even after selecting an individual printing unit from the production...
Back
Top