Search results

Late response........we print very special format most 25x65cm on this narrow format we got some streak come and go in print direction. KM spend alot time to fix this. Seems that this never be fixed.....only way to print these in slow print speed. Since we reduce the speed and all those updates...

Aren't they in .cbl format ?

Wrong disk, corrupt disk !?

Is this error in use or when u setup the water faintain in the morning ? In the morning u have to once press the motor button to make the roller do a full round to get wet. After that use the lever to setup the roller and than press the motor button. If u press motor button with dry roller and...

Didn't got any failure protocols?

What's ur environment temperature ? For sure hot machine takes longer to cool down. When i shut down the machine after 14 hour printing the machine normally takes about 5-7 minutes maybe. 22°c room Temperature. After short time printing "maybe an hour" it is much faster 1-3 minutes maybe...

Our 14000 shut down in this screen after 1-5 Minutes

Dont know the machine. I'll do it on GL 40 like this: Choose zero position in pqc. There have nothing to be selected when adjust zero position because it give errors !! Find the key that is equal to mooost of the ink slides. Pull the measuring tool over one of these slides and read the result...

We've got this.... Type MCB Have to look for the manual ;-) Why don't ask WEKO or manroland for the manual ?

Pls upload again.....

I dont know

If u dont have one ask manroland.

Old machines need language disk if it isnt already installed other language

Thank u..... I only drag and drop files. Never used the import thing.

We often got bigger jobs. When i add job via job centro job gets immediately ripped. Cost up to half an hour. After that i cant change settings via job centro without rip again. All setting must be set on C6100 machine to prevent rip again. How to prevent KM 6100 / Job Centro from immediately...

Does it work without tandem ? What will i see ?

The bearing of the roller seems ok.

The first ink form roller jumps on the operating side. When I look through the cover on printing press at the first form roller, it moves too much and jumps a little. The roller has no contact to the plate and cannot be adjusted. I have removed it and measured 70mm. The roller lock closes very...

Dunno about this. Can u see the uv light when printing

Never touched those settings