dismantle both sides carefully everything is in your way......take out old anilox.....place in new anilox....assemble everything back in original...
If paper streching is you problem maybe you should change paper grain direction
gluing should be the second step if laminating and UV is possible at that thickness,or die cut for centre and holes has to be the last step, but...
since overlapping of two sheets is not perfect ,die cut can't be neither...
first check if com port configurations are ok
Also might be clogged thread...check ,clean,grease.Fine adjustment is possible changing sensor position but not recommended
deacivating the side lay from the console you are able to move it by hand with a knob fitting on that hole near that small gear
E17 is overrun error.The home position sensor should stop the side lay preventing this to happen.
first make a visual check...photocells must be lit ,clean of dust then manually insert a sheeet of paper covering photocells and with a non...
take some good pictures and upload
That is condensation ....reduce difference of temperature between press and ambient
which model of Varicam you have?
Conventional UV; High power consumption High heat output Wider range of UV light 200 - 400nm wavelength High press speeds Requires external...
one option would be getting through impression your paper stock before print
air cylinder sensor ,problem solved...thank you
forgot to mention. 1997 L640 press
APC errror lit,continously ringing,motor clutch won-t disengage. Resetting the press wont help,neither switching on manual. checked PLC X013...
recently i had to replace the pc from the PDC.And after installing all softwares when i'm opening the PDC-S software i got this "no x-rite...
what type of press you have more exactly?
looks like i'm not the only one with this problem...it happened to me twice same screw at the same unit...
