Have not had a headache since we sold the shop 4 years ago .. I Just stopped in here to have a laugh reading about print problems ,it looks like...
hey ..for giggles open up the main back door and clean the AC filter !!
if they are like the qm-46 ..then most likely you have collapsed springs causing the bite???
DRY weather will do it !!!!!!! what is the humifdity in the shop...
Just like this one on Amazon but only asking $400 We used it once 20 years ago to set up Our DPM 2000 plate maker...
yes they are good !! been using pronto and v wash for years but switched to Miracle Blue Safe and Easy for roller wash....LESS SMELL and I use...
Some days , all of a sudden I can not get the job to the stacker , or assign stock to tray ,or sometimes within a multi page job the image is...
use pad printing with a back cover
we run the futura.. or XPI solid 1/8th" off at the tail
try XPI paper we run mattes/ silk in enhanced image mode
this happens to us with silk /dull coated stocks- have you tried running the job in enhanced mode?
13x19 80lb dull text :P:P:P:P:P:P the stock is like a rubber band lol ...and can not get the image to print straight ....the job runs perfect and...
check the AC air filter..I bet it is filthy !!
...tech cleaned conections in back...so far so good yesterday and today ..
..every day for a month .. first step.. new wire and holder ..and a full re-boot gets us going. Not today.. we got our wire fault, rebooted and...
umm.... did you try a full re-boot?
..Looks like a roller issue to me??? pull out the blanket wash device and pull out the 3rd form roller ( un-screw the allen bolt and drop the...
go to advance reply and click the paper clip
does it show up if you start off running the press slower??wil it happen on thick stock? or just envelopes?
Need to see the lines..but it sounds like a form roller is going south...my guess . the one that swings down/.the one up above the wash up...