Search results

Thanks for your reply. I don't think your idea is what's happening on my press. All the pressures/stripes are measured with the metering roller engaged, and you can adjust the stripe with the usual controls, so the lateral movement shouldn't affect the stripe when engaged. I've one more idea to...

Another update. I found out what causes the flare shape at the roller end. The lever that releases the metering roller from the pan roller works a cam, which you use to test the contact stripe, sort of slides the metering roller to the left, and not just straight down. This only happens on the...

Paul, I do have an update. I managed to find OEM metering rollers, and upon adjustment, they behave exactly as aftermarket rollers. Straight bead across the roller, but for about 1.25" on the non-op side. (unit one only) Results in way too much water on the outside edge (non-op side) and no way...

I have a 9995 (3302H) that I bought new, and have used for over 15 years. I always thought the Ryobimatic water system was a bit touchy, but I've gotten used to it's quirks, until now. Those familiar with this system know how the water rollers have to be adjusted for the press to give good...