Recent Activity

mantman replied to the thread Impression Paper Size - HP Indigo 5x00.

max paper?

MIGUEL85694 moved from LIMA-PERU to peru.

andrea De Bortoli replied to the thread Heidelberg MOPV 1991 Plate register not working.

Part code are the same so i think they are interchangeable, tomorrow i will try to swap them to see if it make something change but i...

MIGUEL85694 attached a file to the thread Roland 300 problem.

sale este error

MIGUEL85694 attached a file to the thread Roland 300 problem.

Quizás alguien recibió este error, ¿necesito ayuda?

junker1984 replied to the thread Heidelberg MOPV 1991 Plate register not working.

Pretty sure that's true, i dont have documentation to verify. Look at part designation on board. Someone with better recollection may be...

andrea De Bortoli replied to the thread Heidelberg MOPV 1991 Plate register not working.

so, the MOT1 and MOT2 are interchangable? can i swap to test if the problem changes?

junker1984 attached a file to the thread Heidelberg MOPV 1991 Plate register not working.

This should have come with your machine.

junker1984 replied to the thread Heidelberg MOPV 1991 Plate register not working.

That is correct, cylinder movement via CPC only.

andrea De Bortoli replied to the thread Heidelberg MOPV 1991 Plate register not working.

The CPC has 5 STK power supply all voltages are in spec, 2 MOT card, REK 1/2, 2 MWE card

andrea De Bortoli replied to the thread Heidelberg MOPV 1991 Plate register not working.

So the problem is inside the CPC and not in the CPtronic in the cabinet as the electritian said, do you have the wiring diagram of the CPC?

junker1984 replied to the thread Heidelberg MOPV 1991 Plate register not working.

Pardon me if I'm missing something, but every machine I have ever installed and repaired has had the ink zones, lateral and...

Shay alon print posted a new thread.

cp 2000 keeps restarting

cp 2000 keeps restarting the problem started after the print deleted from the diagnostics the third line s msk encoder fffe what to do?...

Forum: Heidelberg Printing Presses

andrea De Bortoli replied to the thread Heidelberg MOPV 1991 Plate register not working.

The CPC monitor says the register value, but pressing the lateral, circunferential and diagonal registers button the value remains the same

andrea De Bortoli replied to the thread Heidelberg MOPV 1991 Plate register not working.

So i have to control the wiring diagram of the CPC to try to find the problem? and not the SSK board that says that drive the servo motors?