Recent content by Scottmax

No problem! We use this everyday in our shop also check out Revo UV coating fluids!

It's a great machine! We us it in our office daily!

Issue press..We have run into this issue before and I'd say this is most likely mechanical and not electrical. Take the top metal housing off and you will see the blade and clamp drive along with the worm gear. Take the belt off along with the top of that drive and you will find a channel that...

That's sheet size up to 20 x 24 and a quantity of 200. That is current retail pricing on UV coated pieces...5 gallon bucket of UV coating fluid at $270 will coat approximately 11,000 - 13,500 sheets

Jeff, The previous post brought up some good points but you missed a huge one...Cost! Lay flat coatings are much more expensive than the .16 cents a sheet price that UV coating offers. Also there is a much greater variety of options with UV coating fluids which includes soft touch, matte...

This UV Coater is sleek and compact and produces NO VOC's. Completly environmentally friendly. Great for any office or production facility. UV Coates all digital and offset printing, including Xerox, cannon, HP, Oce, Ricoh and Konica. Coat high-gloss, satin or matte finish. Produce high luster...

Rhin-O-Tuff Onyx OD4012 Heavy Duty Interchangeable Die Modular Binding Punch Still using a manual binding punch system? Tired of your punch getting stuck? Tired of the waste? With a multi-punch system like the Onyx OD4012, you will not longer be. Not only will it help you increase your...

During these cold months I have noticed that it is very important to let your UV coating liquid warm to room temperature before loading it into your coater. If you don't the liquid will appear very thick and milky and create all kinds of problems with your coating and machine operation. Just...

XtraCoat Mini UV Coating System, This UV Coater is sleek and compact and produces NO VOC's. Completly environmentally friendly. Great for any office or production facility. UV Coates all digital and offset printing, including Xerox, cannon, HP, Oce, Ricoh and Konica. Coat high-gloss, satin or...

Personally, I would UV Coat the photo's using a Tec Lighting Xtra Coat Mini UV Coater. This will give you the flexibility that you would not get if you laminated the photo's. You can get the UV liquid in either Hi-gloss, satin, or matte finishes. I hope this helps out!

We have a Triumph 4205 and we are doing the same type of volume as you are. MBM is definitely one of the highest quality cutters out there. Your budget does limit your options on a new one but the 4205 is close to the price point you were looking for. Hope this helps...