I normaly reduce pressure and ink.. it helps with doubling
by the way do that when machine is off
I suspect cpc is not responding when you hit the set keys button, you would to look inside the cabin at the the bottom item that looks like a CPU,...
I Have removed the two X7 and X6 plugs and soldered the wires directly onto the board, no issues since...
I would think is more of a calibration issue on the rip. try imaging at diferent resolutions: 1270dpi and 2540dpi if you should notice a huge...
I have a similar problem on unit 2, when you remove the bag the air doesn't blow, I tried exchanging with the next one which works, and it s doing...
My original mouse got damaged, so tried to plug in an old serial mouse from an old computer.. working alright.
Try this link http://www.dipressforums.com/topic.asp?TOPIC_ID=192
sorry, I meant make you sure it does NOT run heavy on the sheet.. typo error.
I have the 5.6R1 version it comes as 2 cds. if you need it let me know, I could may be try to upload it onto a file sharing site.. at no cost of...
We have no problem in varnishing jobs on the DI. In actual fact we even use standard varnish. We make sure it does run heavy on the sheet, and...
I found my roller settings to be crucial in improving this problems and very satisfactory after changing them with new ones.
Try this company they charged usd$641.00 for a set of seven.(if youl need all of them, multiply by 4) http://rollersales.com/rollerprices.asp
disengage the temporary sheet monitoring by calling the special function "18", turn it "OFF", it will not monitor the sheet travel for the job you...
I had the same problem sometime ago, the culprit was the "Famous" problematic X7 plug. Try unpluging and pluging it a couple of times, bend the...