Hie guys, am running an LS40 2002 model. The machine is having what I suspect to be an electrical problem. When printing first side it is running...
Hie guys I'm running a Komori LS440 and of late I've noticed we having problems with air pressure. The machine runs on 6 bars but now at times i...
Hie guys I'm having problems with my water temperature. I set the roller chill roller temperature to 30°C and the fountain water to 10°C but...
Thank you guys for your responses, did bypass and found out that one of the units was faulty it had a poor connection somewhere on the circuit....
Hi guys what causes PDUC 2 & PDUC 1 error on an LS 440. When it gives that error the metering roller starts moving slowly like crawling speed. The...
Hie Guys I've been struggling with this job for sometime now. It's a grey job color values as follows. Cyan-60, Magenta-50, Yellow-46 & Black 39....
Good day Guys. I'm struggling with my roller cooling system. The cooling rollers/chillers are getting way too cold and water ends up condensing...
Which machine are you having problems with? We had our Spica 29 changed the plate clamp on the 3rd unit.
Thanks guys for your responses the problem was solved by loosening the worm gear holder and pushing the worm gear to the other gear and we...