Has this started all of a sudden or was it from day 1 with 0% alcohol? Zero alcohol tends to require clean source H2O and a darned good fount...
Thanks for the understanding. It was a wrench but completely the right thing to do. In hindsight (which is a lovely thing) I ought to have made...
DJ actually helped me out of a deep, deep financial hole (actually, I'm not sure whether he got me into it in the first place :D ! - however,...
Residual heat...well I admit I didn't check stack temps...no need since we'd never had an issue before (or since...even on the reprint) We've...
Sounds like a reasoned assessment YG However, there was 48hrs between print and Spot UV so I would have thought that would have been ample time...
Update:: Just had the reprint back from the same supplier...same inks, same paper, same coating but this time no 'blobs'
Printed on a Heidy CD 5 colour + anilox end of press coater. Air knives and IR. It was a 3000 sheet on 170gm silk run so around 45mins …both...
Hi guys, it's been a while since I've posted but here's an issue that I hope someone somewhere can shed a little light on. I've attached a...
The legend plate on the last unit operators side will show the undercut of the blanket cylinder and the amount of overpack required. If your...
We're still experiencing poor wash -ups does anyone have a clue as to how to increase the length of time that the spray operates? As previously...
Komori every time...I have owned Sprints and Lithrones from 26 to 28, perfectors and straight, from 2 to 6 col...all have the same ease of use and...
Check for wear in the cups (the supports for the stockend of the forme dampener), any up/down movement of the stock will give you this issue. If...
We had a similar issue with our handheld unit...£80 sterling for a new X-rite battery or £8.00 for an equivalent that I soldered up as per the...
Just a shot in the dark here...If it's X-rite and fitted with a rechargeable battery,it may be that the battery is sh@gg@d and won't hold charge....