Recent content by Neess

i bet you are printing on silk coated stock, it will leave that, no way to resolve, try another paper.

I have been changing PR belts on 6 different iGens in the last 10 years, never had a PR belt going so static it nearly cant be tanke off without cutting it after only 3.000 impressions.

We always do a good clean with the right cleaning solution(not the soapy one) The issue seems to have been the tourqeroller slipping and causing static buildup.

Hello. On our iGen150 press we have a lot of issues with static PR belts, they run about 4-5k impressions and then the PR Drive velocity error starts to pop up. Meaning we use alot of PR belts lately. Any advice?

clean the magenta laser glass, ive seen this a few times, only happens to magenta due to its placement over the fuser, maybe the fuserexhaust is not working probally

We had 2 canons like 8 years ago, I hope they got better ! Besides that we changed the most of our printing machines into 2 x HP indigo 12000, they are really impressive. 1 machine equals the volume of 3 iGens. Been working with iGens for 10 years :-)

job processing with auto center on VDP jobs failed for us aswell, i would recomend using imageshift to align pages instead.

Well its as spot on as Indigo, the iGen150 dont use grippers ;-) Btw Peels, my iGen days will be over soon, after about 10 years since my first iGen3(6 different iGens through the time) we are now replacing Xerox with 2 x HP indigo 12000

Very consistent.

front-to-back registration on xxl sheets is spot on, on all my presses. The iGen family has a great registration compared to other digital presses.

The DPI on the 150 is higher, meaning better quality and sharper black text. Reliability seems the same. I got both 150 and 4 in our shop, i would defenitly go for 150.

I peel off the plastic completely, take a used pip foil platicroll and attach to the other edge so it gives me a grip, slides ind the metal hooks on the blanketdrum, holds the blanket with the piproll in a firm grip, inching it through the machine, when it nears the bottom i just let go of the...

Hello! We have had the same issues. The solution is turning back to FuserFluid1, im guessing you are using FuserFluid2. The fuserrolls will be not be able to run the same number of prints, but you will be able to glue on the inside again.

if you rotate the paper 180degrees in the feeder, does the problem move to the other side of the sheet? Does it appear if you run, say 20, in toptray?