Graphics Board may be problem
Well, CP6 board was faulty.
Is it ok to test the CP6 and GC card in older machine or vice versa?
Polar 78Xt is not booting. Display shows nothing. After power on the display is white which turns black gradually. Backgauge not moving and knife...
Thanks for reply. The brake lining is dry, no oil. Should i check gearbox (worm gear)? what should be the air gap?
Hi I'm experiencing knife afterrun in Polar 78XT. I tried adjusting air gap of Magnetic clutch and brake. What should be the gap thickness? Any...
This is Fully automatic perfector machine.
In Perfection, the gripper assembly is very complicated. Gripper opening cam, Storage drum reversing drum, sensors, hydraulics, hydraulics clamps...
Hi I'm having this Problem recently . Moinitoring of reversing drum - storage drum synchronization. The Machine is SM74 8 color 5PH. Previously it...
The motor commutator and brush may not have good contact because of oil and carbon dust. cleaning it will solve most of the time.
The filter is beside the D pump. Its at Y type Splitter. You unscrew the cap and take out filter, clean and it should be OK. Is the problem...
Did this error just came suddenly or did the problem for some motors already exist?